 Origin |
China |
1. New high technology application project of Shanghai city, grade: A, project number: 20050334
2. The anti daze security assistant for automobile was equipped by 5 systems:
2.1The optical signal collecting system: it consist of high sensible photoelectric sensor, it turn the light change to be simulated current change signal, and send it to the intelligent processing system.
2.2The intelligent processing system: it consist of intelligent circuit, analyze, optimize and processing the simulated signal received, send the result to control systems.
2.3The control and driving system: according to the result send from intelligent circuit, it control and drive the regulated direction change and distort of asymmetry macromolecule by electromagnetic field produced from the electric conducted film, thereby refract and transmit the light passing.
2.4The crystal light change system: imported from America, it consist of 5 layers of electric control optical display component in sheet shape, through the combination and co work of this 5 layers, the light change effect could display by 0.1 seconds under intelligent processing system control, the system with specialty of high speed response, high contrasting, high definition, low voltage drive, super wide temperature, long life.
2.5The absorb direction change system: the manual vacuum osculum, could adjust in 360 degree angle, easy to adjust.
3. Before vehicle meet, the security assistant keeping highly transparent to let driver have clear front vision.
4. When vehicle meet the shinning from the remote headlight of opposite vehicle, the security assistant could catch the glare light and lock it’s path, automatically adjust the light within 0.1 second, completely eliminate the glare light and keep the driver’s clear vision.
5. The security assistant could prevent the spasmodical glitz and blind when vehicle meet at night time, anti-xenon lamp, guarantee the driver’s life and property security.
6. The security assistant of automobile night vision is the technology concentration of optics, electronics, colourometry, intelligent control, and division optical system of asymmetry macromolecule
7. Install tips:
7.1 before install, pls clean the osculum and glass.
7.2 when install, pls press the medial axis, not the osculum cap, best to keep the right end edge of the wafer body in straight line with the middle of the steering wheel, install height in alignment with the driver's eye sight, then turn the osculum spanner to lock closely, pls mind the light sensor hole was not cover by the osculum
7.3 when use, best to keep the wafer body in straight vertical for light transmission most effiently.
|
Click to enlarge image
Related Keywords:
Bookmark / Share this page